Speidel Plastic Fermenter or Storage Tank CO2 Transfer Kit

This kit allows you to fill and transfer liquid from any Speidel tank! It includes a Racking Cane, a Speidel Half Inch NPT Adapter, and a Full Port Ball Valve. With this kit, a CO2 tank with regulator, a few feet of hose, and some hardware fittings, you can accomplish the following:

Use the Adjustable Racking Cane to transfer liquid in or out of the fermenter. Close the Ball Valve to pressurize the liquid and/or gas inside the fermenter. Attach a blow-off hose to the Ball Valve using any 1/2" NPT Male connector, then open the valve to expel CO2 from the fermenting wort. Alternatively, use the Adjustable Racking Cane to extract lees, yeast or trub from the bottom of the Speidel, leaving behind clean beer or wine. Or, use the racking cane to rack the finished product off the yeast.

The built-in CO2 Ball Lock connector allows you to force carbonate the contents under controlled regulator pressure, then serve the contents after reducing the regulator pressure.

The kit adapts to your current connecting hardware of choice. You can hook up any 1/2" NPT male connecting item, such as a Cam Lock, Quick Disconnect, or hose barb fitting, to the Full Port Ball Valve to transfer gas or liquid in or out.

This kit works with ALL Speidel Fermenters and Tanks larger than 12L (3.2 gallons).

The key specifications and characteristics are as follows:

All metal components are 304 Stainless Steel. Racking Cane Specifics: - Length: 29 inches - Draw tube is .5" outer diameter, accepting any .5" inner diameter hose - Pass-through compression fitting slides up and down the draw tube, adjusting to fit any size Speidel tank or fermenter - Includes a Siphon Stem Tip to prevent trub or lees from being transferred from the bottom of the vessel

Full Port Ball Valve: - High temperature vinyl covered handle - Standard 1/2" NPT Female connection on outlet side allows you to connect 1/2" NPT Male fitting of your choice

CO2 Ball Lock Connector: - Use a standard "Gas In" Ball Lock to quickly connect and disconnect the CO2 source

This CO2-powered Racking kit is designed for Speidel plastic fermenters and storage tanks. It allows you to use the exit port ball valve to expel CO2 during fermentation and the Adjustable Racking Cane to transfer liquid in or out. Made in the USA with 304 Stainless Steel components.

product information: